• cutting_tools.jpg

SPIRAL TABS 

 

 
  • This TiN coated tap is made of Powder HSS and is suitable for high-speed tapping of through holes
  • List 7912P FAX
  • Code GGN
  • Size M2.6-M24

 


 
  • This TiN coated tap is used when a standard G Gun Tap is too short
  • List 7928 FAX
  • Code GGNL
  • Size M3-M16

 


 
  • This Spiral Pointed Tap is suitable for tapping deep through holes and the chips is being push forward
  • List 6962 HSS
  • Code TGN
  • Size M1.4-M24

 


 
  • This tap is especially suited for tapping through holes on Stainless Steels, Ni-Cr Steels and Heat Resistant Steels
  • List 6966 HSS-Cs
  • Code TGNS
  • Size M2-M20

 


GUN TAPS


 
  • This tap is used for work to be plated or heat treated after tapping,or tapping of contractile material
  • List 6916 HSS
  • Code O-TGN
  • Size M2-M12

 


 
  • This is a general spiral pointed tap for tapping through holes (Metric Sizes)
  • List 922 HSS
  • Code TNIGN
  • Size M1.4-M30

 


 
  • This is a general spiral pointed tap for tapping through holes (Fraction Sizes)
  • List 927HSS
  • Code TNIGN
  • Size W1/8-W1

 


 
  • This is a general spiral pointed tap for tapping through holes (Number & Fraction Sizes)
  • List 929 HSS
  • Code TNIGN
  • Size No.2-No.12

 


 HAND TABS


 
  • This TiN coated tap is made of Powder HSS give long tool life and is suitable for hardened materials up to 40Hrc
  • List 7906P FAX
  • CodeGHT
  • Size M2.6-M24

 


 
  • This TiN coated tap is used when a standard G Hard Tap is too short
  • List7922P FAX
  • Code GHTL
  • Size M3-M16

 


 
  • This standard hand taps set can be used in all application. Each set of taps consists of Taper.Plug and Bottoming types
  • List 912 HSS
  • Code TNIHT
  • Size M1-M30

 


 
  • This standard hand taps set can be used in all application. Each set of taps consists of Taper.Plug and Bottoming types
  • List 907HSS
  • Code TNIHT
  • Size W1/16-W2

 


 
  • This standard hand taps set can be used in all application. Each set of taps consists of Taper.Plug and Bottoming types
  • List 919 HSS
  • Code TNIHT
  • Size No.2-No.12 U1/4-U1-1/4

 


 
  • This standard hand taps set can be used in all application. Each set of taps consists of Taper.Plug and Bottoming types
  • List 9236 Carbide
  • Code EHT 
  • Size M3-M12

 


PAGE 1 2 3

Go to top